SADiE Technical Reference
Analogue Slither Cards Pin-outs
The analogue input card (16 Channel A/D), analogue output card (16 Channel D/A) and mic/line analogue input card all have identical pin-outs. Each D-sub 25 pin connector carries 8 channels of balanced audio and uses the same pin-out as the TASCAM standard as shown below:
1 | Channel 8 hot | 14 | Channel 8 cold |
2 | Channel 8 ground | 15 | Channel 7 hot |
3 | Channel 7 cold | 16 | Channel 7 ground |
4 | Channel 6 hot | 17 | Channel 6 cold |
5 | Channel 6 ground | 18 | Channel 5 hot |
6 | Channel 5 cold | 19 | Channel 5 ground |
7 | Channel 4 hot | 20 | Channel 4 cold |
8 | Channel 4 ground | 21 | Channel 3 hot |
9 | Channel 3 cold | 22 | Channel 3 ground |
10 | Channel 2 hot | 23 | Channel 2 cold |
11 | Channel 2 ground | 24 | Channel 1 hot |
12 | Channel 1 cold | 25 | Channel 1 ground |
13 | No connection | | |
Channels 9 to 16 and higher are in the same order. To connect an input to an output requires a straight through pin-to-pin connection.