| The digital input and output connectors are shared with the analogue RCA line outputs. |
| DIGITAL INPUT |
| Protocols | S/PDIF (consumer, IEC958) or
AES3 (professional AES3-1992, AES/EBU) |
| Connector | RCA Phono socket, AC coupled |
| Input levels | 500mV nominal,
200mV to 2.5Vp-p at all sample rates |
| Input impedance | 75Ω ±5% |
| Sample Rates | 32kHz to 96kHz |
| DIGITAL OUTPUT |
| Protocols | S/PDIF (consumer, IEC958) or
AES3 (professional AES3-1992, AES/EBU)
(software selectable) |
| Connector | RCA Phono socket, AC coupled |
| Output levels | 500mV p-p ± 10% |
| Input impedance | 75Ω ±5% |
| Sample Rates | 32kHz to 96kHz |
| Data Jitter | <12ns p-p |
| The hardware supports 2 channels of analogue input from either RCA Phono sockets at audio line-level, or from the 3.5mm stereo socket (microphones). Note that only one pair of inputs may be used at a time. |
| Sample Rates | 32kHz to 96kHz |
| Conversion | 24-bit 128x over-sampling ΔΣ |
| ANALOGUE LINE INPUTS |
| Connector | RCA Phono socket |
| Nominal level for peak digital audio (sine) | 500mV nominal,
2V RMS (8.24dBu) |
| Input impedance | 47kΩ ±5% |
| Frequency Response | 20Hz - 20kHz, +0/-0.1dB, AC coupled |
| Total Distortion + Noise (THD+N) | < -93dB (0.0022%)
at 1kHz, peak level |
| L/R channel matching | better than 0.2dB |
| MICROPHONE INPUTS |
| Microphones may be either dynamic or electret-condenser types. Phantom power is not provided. |
| Connector | 3.5mm stereo jack socket |
| Nominal level for peak digital audio (sine) | 500mV nominal,
-45dBu, 4.3mV RMS |
| Nominal Input impedance | 620Ω |
| Frequency Response | 20Hz - 20kHz, +0/-1dB, AC coupled |
| Total Distortion + Noise (THD+N) | < -69dB (0.035%)
at 1kHz, peak level |
| |
| The hardware has two sets of outputs, a pair of RCA Phono sockets which can be either analogue outputs or digital I/O, and a 3.5mm stereo headphone output jack |
| ANALOGUE LINE OUTPUTS |
| Connector | RCA Phono socket |
| Nominal level from peak digital audio (sine) | 500mV nominal,
0.8V RMS (0.28dBu) |
| Output impedance | <10Ω |
| HEADPHONE OUTPUTS |
| Connector | 3.5mm stereo jack socket |
| Nominal level for peak digital audio (sine) | 500mV nominal,
-45dBu, 4.3mV RMS |
| Output impedance | <10Ω |
| Max Output power | 30mW into 32Ω
40mW into 16Ω |
| Dimensions |
| Height | 1.7" (43mm) |
| Width | 3.94" (100mm) |
| Depth | 4.85" (123mm) including connectors |
| Weight | 14oz (400g) |
| Power |
| Voltage | 5V DC - adaptor supplied |
| Consumption | 490mA |
Specifications subject to amendment.
|
